Mercedes-Benz A 160 User Manual

X
Take the bulb out of bulb holder =.
X
Insert the new bulb into bulb holder =.
X
Insert bulb holder = into the lamp and turn
it clockwise.
X
Align the bottom of housing cover ; and
fold it upwards until it engages.
X
Left-hand headlamp: install the washer
fluid reservoir (Y page 89).
Main-beam headlamps (halogen head-
lamps)/cornering lamps (bi-xenon
headlamps)
X
Switch off the lights.
X
Open the bonnet.
X
Left-hand headlamp: remove the washer
fluid reservoir (Y page 89).
X
Press retaining lug : down and remove
housing cover ;.
X
Turn bulb holder = anti-clockwise and pull
it out.
X
Take the bulb out of bulb holder =.
X
Insert the new bulb into bulb holder =.
X
Insert bulb holder = into the lamp and turn
it clockwise.
X
Align the bottom of housing cover ; and
fold it upwards until it engages.
X
Left-hand headlamp: install the washer
fluid reservoir (Y page 89).
Side lamps/parking lamps(halogen
headlamps)
X
Switch off the lights.
X
Open the bonnet.
X
Left-hand headlamp: remove the washer
fluid reservoir (Y page 89).
X
Press retaining lug : down and remove
housing cover ;.
X
Pull out bulb holder =.
X
Take the bulb out of bulb holder =.
X
Insert the new bulb into bulb holder =.
X
Insert bulb holder =.
X
Align the bottom of housing cover ; and
fold it upwards until it engages.
X
Left-hand headlamp: installthe washer
fluid reservoir (Y page 89).
Turn signals
You must open the cover of the front wheel
housing before you can change the turn signal
lamp.
90
Changing bulbs
Lights and windscreen wipers

Mercedes-Benz A 160 Specifications

General

Brand	Mercedes-Benz
Model	A 160
Category	Automobile
Language	English