X
To switchthe connected powersupply
on or off: turn the key in the ignition lock
to position 2 or 0 respectively.
Trailer with 7-pin connector
General information
If your trailer has a 7-pin connector, you can
connect it to the 13-pin socket on the ball
coupling using an adapter or, if necessary, an
adapter cable. Both of these can be obtained
at a qualified specialist workshop, e.g. at a
Mercedes-Benz Service Centre.
Fitting the adapter
X
Fold downthe socket.
X
Open the socket cover.
X
Insert the connector with lug : into
groove ; on the socket and turn the con-
nector clockwise to the stop.
X
Let the cover engage.
X
If you are using an adapter cable, secure
the cable to the trailer with cable ties.
!
Make sure that there is sufficient cable
play so that the cable cannot become
detached when cornering.
Trailer towing
149
Driving and parking
Z
To Next Page
Loading...
Need help?
General
