Selecting the language
The Language: function allows you to select
the language for the instrumentcluster.
X
Press V or U on the steering wheel
to selectthe Settings
menu.
X
Press & to call up the selection of sub-
menus.
X
Press W or X to select the Inst.
cluster submenu.
X
Press the & button to select Language.
X
Press the W or X button to select the
desired language.
X
Press the &, V or U button to
select a different display.
Selecting the status line display
Vehicles for the United Kingdom: this func-
tion is not available.
X
Press V or U on the steering wheel
to select the Settings
menu.
X
Press & to call up the selection of sub-
menus.
X
Press W or X to select the Inst.
cluster submenu.
X
Press & to select Status line dis‐
play.
X
Press W or X to select the display in
the status line: speed (Speed
) or outside
temperature (Outside temp.).
The selected display now appears con-
stantly in the lower multifunction display.
When you scroll through the Standard dis-
play menu (Y page 156), you will see the
display you have not selected.
X
Press the &, V or U button to
select a different display.
Time/date
This submenu is only available on vehicles
without an audio system or with Audio 5or
Audio 20.
The Time/Date
submenu allows you to set
the time and the date.
Your vehicle could have the following audio
equipment:
A: Audio 5 or Audio 20
B: Audio 50 APS
C: COMAND APS
X
Refer to the separate operating instruc-
tions to find outwhich audio system is fit-
ted in your vehicle.
Depending on the audio system, the time and
date are received from GPS satellites and
cannot be set using the on-board computer
(see the following table).
A B C
Setting using the on-board com-
puter
X
Automatic GPS satellite recep-
tion
X X
X
Press V or U on the steering wheel
to select the Settings
menu.
X
Press the & button to select submenus.
X
Press the W or X button to select the
Time/Date submenu.
X
To set the clock: press & on the steer-
ing wheel to selectTime Hours
or Time
Minutes.
or
X
To set the date: press & to select
Date Set day, Date Set month or Date
Set year.
X
Press W or X to set a value.
X
Press the &, V or U button to
select a different display.
Lighting
Switching the daytime driving lights on/
off
If you have activated the daytime driving
lights function and the light switch is in the
$ or à position, the side lamps,
dipped-beamheadlamps and licenceplate
160
Menus and submenus
On-board computer and displays
To Next Page
Loading...
Need help?
General
