X
To refit: insert the head restraint so that
the notches on the barare on the left when
viewed in the direction of travel.
X
Push the head restraint downuntil you hear
it engage in position.
Folding the front-seat backrests
forward/back
Folding the backrest forwards
With the EASY-ENTRY feature,
15
you can slide
the seatfurther forwards once you have fol-
ded the seat backrest forwards and the seat
is in the rear half of the adjustment range.
This makes it easierfor passengers to get into
and out of the rear compartment.
X
Push the backrest backwards slightly, pull
seat release handle : forwards and fold
the backrest forwards until it engages.
X
Whilst still pulling the release handle, slide
the seat forwards.
X
Swing the belt guide downwards.
Folding back the backrest
X
Pull the release handle and slide the seat
backwards until it engages.
X
Fold back the backrest until the seat and
backrest engage.
X
Swing the belt guide up.
Adjusting the lumbar support
You can adjust the contour of the front seats
so as to provide optimum support for your
back.
X
Move adjustmentlever : in the direction
of the arrow until the desired backrest con-
tour is achieved.
Adjusting the multicontour backrest
You can adjust the contour of the frontseats
individually so as to provide optimum support
for your back.
:
To adjust the backrest contour in the lum-
bar region
;
To adjust the backrest contour in the
upper back region
=
To adjust the backrest side bolsters
15
Only available in three-door vehicles.
76
Seats
Seats, steering wheel and mirrors
To Next Page
Loading...
Need help?
General
