G
Risk of fire
Only use fuses that have beenapproved for
Mercedes-Benz vehicles and which have the
correct fuse rating for the systems con-
cerned. Do not attempt to repair or bridge
faulty fuses. Otherwise, a circuit overload
could cause a fire. Have the cause traced and
rectified at a qualified specialist workshop,
e.g. a Mercedes-Benz Service Centre.
Blown fuses must be replaced with fuses of
the same rating, which you can recognise by
the colour and fuse rating. The fuse ratings
are listed in the fuse allocation chart.A
Mercedes-BenzService Centre will be happy
to advise you.
If the newly inserted fuse also blows, have the
cause traced and rectified at a qualified spe-
cialist workshop, e.g. a Mercedes-Benz
Service Centre.
!
Only use fuses that have been approved
for Mercedes-Benz vehicles and which
have the correct fuse rating for the system
concerned. Otherwise, components or sys-
tems could be damaged.
Before changing a fuse
X
Park the vehicle and apply the parking
brake.
X
Switch off all electrical consumers.
X
Remove the key from the ignition lock.
The fuses and the fuse allocation chart are
located in the fuse box in the front-passenger
footwell.
Fuse box in the front-passenger foot-
well
The fuse box is located in the front-passenger
footwell in front of the seat.
X
Remove the footmats.
X
Turn retaining screw ; anti-clockwise
using a coin for example.
X
Raise cover : and remove it.
X
Remove the cover mat from the battery.
:
Fuse allocation chart
;
Fuse box
240
Electrical fuses
Breakdown assistance
To Next Page
Loading...
Need help?
General
