Display messages
Hiding display messages
Display messages appear in themultifunction display.
X
Press the V, U, & or * buttononthe steering wheel to select another display.
or
X
Press the reset button on the instrument cluster (Y page 24).
The display message is cleared.
The multifunction display shows high-priority display messages in red.
You cannot hide display messages of the highest priority. The multifunction display shows
these messages continuously until the causes for the messages have been remedied.
Certain display messages are accompanied by an audible warning tone or a continuous tone.
Please respond in accordance with the display messages and follow the additional notes in
this Owner's Manual.
Message memory menu
The on-board computer saves certain display messages. You can call up the display messages
in the message memory menu.
The message memory menu is only shown if any display messages have been stored.
X
Press the V or U button repeatedly, until either the original menu or the message
memory menu is shown.
If there are display messages, the multifunction displayshows, for example, 2 messages
.
X
Press the & or * button to scroll through the display messages.
When the ignition is switched off, all display messages are deleted apart from some high-
priority display messages. Once the causes of the high-priority display messages have been
rectified, the corresponding display messages are also deleted.
166
Display messages
On-board computer and displays
To Next Page
Loading...
Need help?
General
