Removing the seat cushions
X
Insert the seatbelt into seat-belt
extender :.
X
Fold the left-hand or right-hand seat cush-
ion ; forward.
X
Grasp release handle ? and pull seat cush-
ion = upwards.
X
Remove seat cushion =.
X
If the backrest is to be removed: fold down
hinge A.
If the backrest is only to be folded down:
leave hinge A as a support for the backrest
in the position shown above.
i
Vehicles with a TIREFIT kit or the
"Minispare" emergency spare wheel:
You can store the seat cushions under the
variable luggage compartment floor.
!
Vehicles with spare wheel, loudspeaker
system or sound system:
You cannot store any seat cushions under
the variable luggage compartment floor.
Fitting the seat cushions
X
Fold hinge A upwards if necessary. Only
then can the seat cushion be slid in.
X
Slide the seat cushion ontothe fixtures
until it engages.
i
For easier alignment of the cushions,
observe the arrows on the rear of the seat
cushions.
X
Swing the seat cushion back.
Removing the backrest
X
Fold the seat cushion forward
(Y page 196).
196
Stowage areas
Stowing and features
To Next Page
Loading...
Need help?
General
