Mindray DP-50 User Manual

DICOM 10-13
c) The scheduled patients, which meet the criteria, are displayed in the lower part of
the screen.
d) After the first query, you can perform the second query based on the preview
results. The scheduled patients in the list will update in real time.
(4) Select the desired patient record in the displayed patient list, and
Select the desired patient and click [Start Exam], the patient information is imported
into the system and then an exam is started.
Click [Transfer], the patient information is imported into the Patient Info screen. Edit
the patient information in the Patient Info screen, and select [OK] to start a new exam.
(5) To show patient information in details:
a)
Click to select a patient record.
b) Click [Show Detail] to view the detailed patient information and properties.
 Use the automatic query function via Worklist server
(1) Enter DICOM Service Preset screen, and open the Worklist page: [Setup]
→[DICOM
Preset]
→[Set DICOM Service]→“Worklist”.
(2) Select an item in the service list, and click [Default] to set the server to be the default
service.
(3) Click [Exit] and click [Return] in the Setup menu.
(4) Press <Patient> to enter Patient Info screen.
(5) Click [WorkList] to enter the WorkList page.
(6) The system queries intraday patients via Worklist server automatically and the patient
records will appear in the list.
In the off-line status, you can:
 Perform a second query; or,
 Click [Show Detail] to view the patient information in details:
10.3.4 MPPS
MPPS is used to send exam state information to the configured server. This will facilitate the
other systems to obtain the exam progress in time.
The status information is described as below:
 When you begin an exam or send image(s) during the exam, the system sends
status information “Active” to MPPS server.
 When the exam is completed, the system sends status information “End” to MPPS
server.
 When a paused exam is continued, the system sends status information “Active” to
MPPS server.
 When an exam is cancelled, the system sends status information “Cancelled” to
MPPS server.
10.3.5 Storage Commitment
Storage commitment is used to make sure the images are successfully stored in the DICOM
server.
Before storage commitment, you should set a default storage commitment server.
 Storage commitment after sending images on iStation screen
(1) Open iStation screen: press <iStation> or press <Patient> and click [iStation].
(2) Select an exam record (image (s) is/are stored in the exam record), click
to
open the Send To dialogue box.

Mindray DP-50 Specifications

General

Brand	Mindray
Model	DP-50
Category	Medical Equipment
Language	English