Setup 11-1
11 Setup
The Setup function is designed to set the configuration parameters of operating the system
and maintaining user workflow setup data. The setup data of the user and system are stored
to the hard drive, and should be backed up to CD/DVD or USB memory devices.
CAUTION:
When the setup data is changed, be sure to save the preferences
according to the methods described in this chapter. Mindray is
not responsible for the loss of the setup data.
To enter Setup:
Press the <Setup> to enter Setup;
To exit Setup:
Click [Save] on the Setup menu and the parameter settings is saved.
Click [Cancel] or press <Esc> on the control panel to exit the setup.
If you change the system language and click [Save] on the Setup menu, the system will
automatically restart to make the change effective.
11.1 System Preset
Click [System Preset] on the Setup menu, you can preset:
Region
To set the hospital name, language, time zone, time format, system
date/time, logo and so on.
General
To set patient information, exam setup, patient management, storage,
system dormancy, operation log and so on.
To set some general parameters in imaging modes.
Application To set the measure ruler, measure result, units and so on.
Obstetrics
To set the relevant information about fetal gestational age, fetal growth
formula and fetal weight.
To assign functions to footswitch and user-defined keys.
Biopsy
To set the needle-guided bracket model and biopsy guide line relevant
parameters.
To set the user account control relevant information.
To Next Page
Loading...
Need help?
General
