NETGEAR GS724TPv2 User Manual

Configure Switching
148
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
• To display LAGs only, click the LAG link.
• To display both physical ports and LAGs, click the All link.
8. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the interface, or
type the interface number in the Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the heading
row.
9. From the Interface Status menu, select one of the following options:
• Static. The interface receives all multicast traffic on the VLAN and forwards the traffic.
• Forbidden. The interface cannot receive any multicast traffic on the VLAN, even if the
IGMP or MLD snooping process designated the interface as a member of a multicast
group.
• Excluded. The Multicast Forward All option is not enabled on the interface, that is,
the interface does not forward all multicast traffic on the VLAN. This is the default
state.
10. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
View and Configure the MAC Address Table
You can view or configure the MAC Address Table. This table contains information about
unicast entries for which the switch holds forwarding or filtering information. This information
is used by the transparent bridging function in determining how to propagate a received
frame.
Configure the MAC Address Table
 To configure the MAC Address Table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 9.
The login window opens.

NETGEAR GS724TPv2 Specifications

General

Brand	NETGEAR
Model	GS724TPv2
Category	Switch
Language	English