8
1
1. Get Started
This manual describes how you can configure and operate the NETGEAR 24-Port Gigabit Smart
Managed Pro Switch with PoE+ and 2 SFP Ports, Model GS724TPv2 by using the web-based
management interface. The manual describes the software configuration procedures and
explains the options that are available within those procedures.
This chapter provides an overview of how you can start your switch and access the web-based
management interface. The chapter contains the following sections:
• Switch Management Interface Overview
• Change the Default IP Address of the Switch
• Discover a Switch in a Network With a DHCP Server
• Discover a Switch in a Network Without a DHCP Server
• Configure the Network Settings on Your Computer
• Access the Web Browser–Based Management Interface
• About the User Interfaces
• Use a Web Browser to Access the Switch and Log In
• Web Browser–Based Management Interface Device View
• Interface Naming Conventions
• Configure Interface Settings
• Context-Sensitive Help and Access to the Support WebSite
• Register Your Product
Note: For more information about the topics covered in this manual, visit the
support website at www.netgear.com/support.
Note: Firmware updates with new features and bug fixes are made
available from time to time at downloadcenter.netgear.com. Some
products can regularly check the site and download new firmware, or
you can check for and download new firmware manually. If the
features or behavior of your product does not match what is
described in this guide, you might need to update your firmware.
To Next Page
Loading...
Need help?
General