Name: NETGEAR GS724TPv2
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Configure System Information

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2

Enable DHCP for All Interfaces in a VLAN

 To enable DHCP snooping for all interfaces that are members of a VLAN:

1. Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or

connect directly to a switch that is off-network using an Ethernet cable.

2. Launch a web browser.

3. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Change the Default IP Address of the

Switch on page 9.

The login window opens.

4. Enter the switch’s password in the Password field.

The default password is password.

The System Information page displays.

5. Select System > Services > DHCP Snooping > Global Configuration.

The DHCP Snooping Global Configuration page displays.

6. In the VLAN ID field, specify the VLAN on which DHCP snooping is enabled.

7. From the DHCP Snooping Mode menu, select Enable.

8. Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect

immediately.

Interface Configuration

You can view and configure each port as a trusted or untrusted port. Any DHCP responses

received on a trusted port are forwarded. If a port is configured as untrusted, any DHCP (or

BootP) responses received on that port are discarded.

 To configure DHCP snooping interface settings: