Nibe F1330 User Manual

54 NIBE F1330
Control
Control
9.0 Service menues
[N]
9.1.0 System settings
[S] 9.1.1 Expansion card 11 [S]
9.1.2 Expansion card 12 [S]
9.1.3 RCU [S]
9.1.4 Sub shunt [S]
9.1.5 Pool [S]
9.1.6 Hot water acc. tank [S]
9.1.7 Fixed condensing [S]
9.1.8 Additive [S]
9.1.9 Extra collector [S]
9.1.10 Cooling [S]
9.1.11 Room control mode [S]
9.1.12 HW with additional heat [S]
9.1.13 Return to 9.1.0
[S]
9.2.0 Floor drying setting
[S] 9.2.1 Op-mode floor drying [S]
9.2.2 Floor drying day [S]
9.2.3 Nos. of days per. 1 [S]
9.2.4 Temperature per. 1 [S]
9.2.5 Nos. of days per. 2 [S]
9.2.6 Temperature per. 2 [S]
9.2.7 Reteurn to 9.2.0
[S]
9.3.0 Alarm log [S]
9.3.1.0
- 9.3.6.0 Alarm 1 - 6 [S] 9.3.x.1 Type of alarm [S]
9.3.x.2 Heat pump [S]
9.3.x.3 Date [S]
9.3.x.4 Time [S]
9.3.x.5 Outdoor temperature [S]
9.3.x.6 Hot watertemperature [S]
9.3.x.7 Flow temperature. [S]
9.3.x.8 Heating flow/return [S]
9.3.x.9 Brine in/out [S]
9.3.x.10 Hot gas temperature [S]
9.3.x.11 Overheating temp. [S]
9.3.x.12 Liquide line temp. [S]
9.3.x.13 Relay status 1 - 8 [S]
9.3.x.14 Relay status 9 - 14 [S]
9.3.x.15 Compressor status [S]
9.3.x.16 Return to 9.3.x.0
[S]
9.3.7 Clear the alarm log [S]
9.3.8 Return to 9.3.0
[S]
9.4.0 Testing mode
[S] 9.4.1 Force control [S]
9.4.2 Relay card [S]
9.4.3 Relay 1 - 8 [S]
9.4.4 Relay 9 - 14 [S]
9.4.5 Return to 9.4.0
[S]
9.5 Return to 9.0
[S]
[N] Normal menus: Displayed in all menu modes.
[U] Extended menus: Only displayed when extended or
service is selected in menu 8.1.1.
[S] Service menus: Only dispalyed when service is selected
in menu 8.1.1

Nibe F1330 Specifications

General

Brand	Nibe
Model	F1330
Category	Heat Pump
Language	English