3
O/S: 6. Corne
6. Calculate the Corner Point
Press the [O/S] key on the BMS and select [6] to
enter the Corner point function.
Take a distance measurement to the first prism (or
target) on the wall, press the [MSR1] or [MSR2]
key.
Sight a second point on the same wall with the first
point measurement and press the [MSR1] or
[MSR2] key again.
Sight a third point, the first point on the second wall.
Press [MSR1] or [MSR2] again.
If the two walls can be assumed to be a right angle,
you can press [Calc] to calculate the corner point by
three points.
3-77
To Next Page
Loading...
Need help?
General
