3
Input Point Name/Numbe
Press the [ENT] key on the last line (CD: field) to
store the point in the current Job.
3. Pressing [ENT] without a PT
When you want to use a point without recording the
coordinate, you can just press the [ENT] key
without inputting a PT name.
ENT
The input coordinate will be used temporarily in the
calculation but will not be saved in the database.
4. When a Wildcard (*) is Specified
A list of available points are displayed when you use
an asterisk to input PT or CD.
ENT
Use the Up/Down arrow keys and press the [ENT]
to select the point you want to use.
When
and/or
is shown in the list, the
Right/Left arrow keys are also available to page-up/
page-down the list.
[ENT]
When you select a point on the list, its coordinate is
displayed with a beep.
3-8
To Next Page
Loading...
Need help?
General
