100
Silent Photography
To enable the electronic shutter and
eliminate the noise and vibration caused
by operation of the mechanical shutter,
select [On] for [Silent photography] in
the photo shooting menu.
•
An icon is displayed while silent
photography is in effect.
•
There is no limit to the number of
photos that can be taken in a single
burst, regardless of the option chosen
for Custom Setting d2 [Max.
continuous release].
•
Note that the electronic shutter will be used regardless of the
option selected for Custom Setting d5 [Shutter type].
•
In release modes other than [Continuous H (extended)], the
display will briefly go dark when the shutter is released. This
signals that a photo has been taken.
•
Regardless of the setting chosen for [Beep options] in the
setup menu, no beep will sound when the camera focuses or
while the self-timer is counting down.
•
Enabling silent photography disables some features,
including:
- the flash,
- long exposure noise reduction,
- flicker reduction, and
- high ISO sensitivities (Hi 0.3–Hi 2.0).
Silent Photography
To Next Page
Loading...
Need help?
General
