Nikon Z 7II User Manual

577
Connecting to Smart Devices
Connecting via Bluetooth
Before connecting via Bluetooth for the first time, you will need
to pair the camera and smart device as described below. The
procedure for iOS differs slightly from that for Android devices.
D
Before Pairing
•
Enable Bluetooth on the smart device. For details, see the
documentation provided with the device.
•
Ensure that the batteries in the camera and smart device are fully
charged to prevent the devices turning off unexpectedly.
•
Check that there is space available on the camera memory card.
❚❚
Connecting to an Android Device for the First
Time: Pairing
For information on connecting to iOS devices, see “Connecting
to an iOS Device for the First Time: Pairing” (
0
584).
1
Camera: Select [Connect to
smart device] > [Pairing
(Bluetooth)] in the setup menu,
then highlight [Start pairing]
and press
J
.
The camera name will be displayed in
the monitor.

Nikon Z 7II Specifications

General

Camera Type	Mirrorless
Sensor Type	CMOS
Sensor Size	35.9 x 23.9 mm
Effective Megapixels	45.7 MP
ISO Sensitivity	64-25600 (expandable to 32-102400)
Image Processor	Dual EXPEED 6
Continuous Shooting Speed	10 fps
Video Recording	4K UHD up to 60p
Weather Sealing	Yes
Connectivity	Wi-Fi, Bluetooth
Viewfinder	3.69M-dot OLED
LCD Screen	3.2-inch tilting touchscreen, 2.1M dots
Battery	EN-EL15c
Battery Life	Approx. 420 shots per charge (CIPA standard)
Weight	705 g (body only)
Dimensions	134 x 100.5 x 69.5 mm
Autofocus System	Hybrid phase-detection/contrast AF with 493 points