Omron E5AN-H User Manual

216
PID Setting Level Section 5-6
5-6 PID Setting Level
The PID setting level is used to make settings such as PID values for each
PID set and MV limit values. Move to a particular PID set from the Display PID
Set Selection parameter, which is displayed first in the PID setting level.
This parameter is used to select the PID set for making the display settings.
• This parameter selects the PID set for which the display settings are to be
made.
• Up to eight sets (1 to 8) can be used. The following items registered in
each set: PID value, MV upper and lower limits, automatic selection range
upper limit, cooling coefficient, and LBA detection time.
Note The current PID set will be displayed. If you use the U and D Keys
to change the PID set, the monitor function will be canceled.
■ Related Parameters
Bank No. (operation level): Page 179
d.pid Display PID Selection
d.pid
3
d.pid
2
d.pid
1
d.pid
8
M
M
M
M
M
M
1.oll
-5.0
M
M
M
M
M
M
M
M
M
8.p
8.0
l
-5.0
8.d
40.0
h
105.0
M
M
M
8.ol
8.ol
1.p
8.0
1.i
233.0
1.d
40.0
1.olh
105.0
1.aut
1320.0
1.csc
1.00
1.lba
0
8.i
233.0
8.aut
1320.0
sc
1.00
8.c
8.lba
0
c
c
c
c
Power ON
Operation Level
Adjustment
Level
PID Setting
Level
Bank Setting
Level
Temperature control
being performed.
Press the O Key
for at least 1 s.
PID Setting Level
Display PID Selection
PID1
PID 8
Proportional Band
PID2
PID3
PID8
PID 8 Integral Time
PID 8 Derivative Time
PID 8 MV Upper Limit
PID 8 MV Lower Limit
PID 8
Automatic Selection
Range Upper Limit
PID 8
Cooling Coefficient
PID 8
LBA Detection Time
Setting range Default
1 to 8 See note.
Function
Settin
g
See
See

Omron E5AN-H Specifications

General

Brand	Omron
Model	E5AN-H
Category	Temperature Controller
Language	English