216
10. Flash
If you attach the Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L:
optional) to the hot shoe, you can record using the flash.
You can also use a commercially available external flash by connecting a
commercially available synchro cable to the flash synchro socket.
Furthermore, by attaching a compatible external flash to the camera, you
can wirelessly control external flashes placed in positions away from the
camera.
Removing the Hot Shoe Cover
Before attaching the Flash (optional), remove the hot shoe cover.
Refer to the operating instructions for the Flash for details about how to
attach it.
Remove the hot shoe cover by
pulling it in the direction indicated
by arrow 2 while pressing it in the
direction indicated by arrow 1.
Using an External Flash (Optional)
0 Before use, remove the lens hood to prevent vignetting.
0 Flash recording is not possible when the following functions are being used:
– Video recording/[6K/4K PHOTO]/[Post-Focus]
– [ELEC.]/[Silent Mode]/[High Resolution Mode]
– [Filter Settings]


To Next Page
Loading...
Need help?
General
