16. Connecting to Other Devices
436
By connecting the camera to a Panasonic Blu-ray disc recorder or DVD
recorder, you can store the pictures and videos.
Getting started:
0 Turn on the camera and recorder.
0 Images to be stored should be saved on an XQD card and inserted in card slot 1.
1
Connect the camera and recorder with the USB
connection cable (C–C or A–C).
0 Plug in/out straight holding onto the plug.
(Inserting these at an angle may cause deformation or malfunction)
0 Do not connect the cable to the wrong terminals. This may cause a
malfunction.
2
Press 34 to select [PC(Storage)] and then press or
.
0 A message about charging may be displayed. Wait for a while until the
message disappears.
3
Operate the recorder to store the images.
Storing on a Recorder
To Next Page
Loading...
Need help?
General
