3. Basic Operations
58
Adjusting the Angle of the Monitor
This camera has a 3-axis tiltable monitor.
Adjust the angle of the monitor to match the recording conditions.
This is useful for high and low angle recording.
≥High angle recording (horizontal
position)
≥Low angle recording (horizontal
position)
≥High angle recording/Low angle recording (vertical position)
0
Open the monitor while pushing up on the monitor lock lever.
0 Take care not to trap a finger in the monitor.
0 Do not apply an excessive force to the monitor. This may cause damage or
malfunction.
0 When you will not use the camera, fully close the monitor by returning it to its
original position.
0 When attaching to a tripod, close the monitor by returning it to its original
position.
0 The opening angle of the monitor may be limited by the tripod used.
To Next Page
Loading...
Need help?
General
