- Loosen the nut fixed to the muffler support on the
other side.
- Undo the two upper nuts (one on each side) fixing
the shock absorber spring unit to the frame and
remove the shock absorbers themselves.
Refitting
Carry out the previous operations but in reverse order.
Locking torques (N*m)
Lower shock absorber clamp 33 ÷ 41 Upper shock absorber clamp 33 ÷ 41
Exhaust bracket
Removal
- Remove the muffler.
- Loosen and remove the lower retaining bolt of the
right-hand shock absorber at the support arm.
- Undo the two screws fixing the arm to the engine.
Carnaby 125 - 200 Suspensions
SUSP - 213
To Next Page
Loading...
Need help?
General