59263-01 A 1-1
1 Introduction
This guide describes the features and use of the command line interface for
SANbox 5802V switches running firmware version 7.4. This guide is organized as
follows:
îš„ Section 1 describes switch models and features, the intended audience,
related materials, new items in this release, and technical support.
îš„ Section 2 describes logging on and off of a switch, opening and closing an
Admin session, entering commands, getting help, paging a switch, setting
page breaks, and loading and retrieving files.
îš„ Section 3 describes the management of user accounts and passwords.
îš„ Section 4 describes configuring the switch network configuration.
îš„ Section 5 describes managing the switch configuration, setting the date and
time, backing up and restoring the switch configuration, resetting the switch,
installing firmware, and installing feature licenses.
îš„ Section 6 describes port configurations, resetting a port, initializing a port
loop, configuring port threshold alarms, and testing ports.
îš„ Section 7 describes managing the zoning database and configuring
interoperability.
îš„ Section 8 describes managing connection security.
îš„ Section 9 describes managing device security.
îš„ Section 10 describes managing the Remote Authentication Dial-In User
Service (RADIUS) server.
îš„ Section 11 describes events and event logging.
îš„ Section 12 describes managing Call Home email notification.
îš„ Section 13 describes managing the Simple Network Management Protocol
(SNMP) configuration.
îš„ Section 14 lists the commands in alphabetical order, including the command
syntax, keywords, notes, and examples.
An index is also provided.
To Next Page
Loading...
Need help?
General
