5 – Switch Configuration
Displaying Switch Information
5-4 59263-01 A
S
System Process Information
The Ps command displays system process information to help you determine
what processes are running and CPU usage. The following example displays
current system processes.
SANbox #> ps
PID PPID %CPU %MEM TIME ELAPSED COMMAND
244 224 0.0 0.3 00:00:04 2-03:02:31 cns
245 224 0.0 0.3 00:00:06 2-03:02:31 ens
246 224 0.0 0.3 00:00:09 2-03:02:31 dlog
247 224 0.0 0.6 00:00:33 2-03:02:31 ds
248 224 0.3 2.8 00:09:59 2-03:02:31 mgmtApp
249 224 0.0 0.3 00:00:16 2-03:02:31 sys2swlog
251 224 0.0 0.4 00:00:06 2-03:02:30 fc2
252 224 0.0 0.6 00:00:16 2-03:02:30 nserver
253 224 0.0 0.8 00:00:08 2-03:02:30 PortApp
254 224 0.0 0.5 00:00:03 2-03:02:30 qfsApp
255 224 0.0 0.5 00:00:09 2-03:02:30 mserver
256 224 0.0 0.7 00:00:06 2-03:02:30 eport
257 224 0.0 0.6 00:00:13 2-03:02:30 zoning
282 254 0.0 0.5 00:00:00 2-03:02:26 qfsApp
284 224 0.0 0.6 00:00:08 2-03:02:26 snmpservicepath
285 282 0.0 0.5 00:00:00 2-03:02:26 qfsApp
308 224 0.0 0.8 00:00:29 2-03:02:25 cim_server
322 224 0.0 0.7 00:00:16 2-03:02:24 util
323 224 0.0 0.4 00:00:09 2-03:02:24 port_mon
324 224 0.0 0.5 00:00:07 2-03:02:24 diagAgent
325 224 0.0 0.4 00:00:03 2-03:02:24 diagExec
289 224 0.0 0.4 00:00:00 2-03:02:25 snmpd
290 224 0.0 0.5 00:00:00 2-03:02:25 snmpmain
335 290 0.0 0.5 00:00:00 2-03:02:23 snmpmain
336 335 0.0 0.5 00:00:00 2-03:02:23 snmpmain
The column titles are as follows:
 PID–Process identifier
 PPID–Parent process identifier
 %CPU–Percentage CPU usage
 %MEM–Percentage memory usage
 TIME–Actual processing time
 ELAPSED–Elapsed time since the process started
 COMMAND–The command that initiated the process.
To Next Page
Loading...
Need help?
General
