14 – Command Reference
Set Timezone
14-132 59263-01 A
S
Set Timezone
Specifies the time zone for the switch and the workstation. The default is Universal
Time (UTC) also known as Greenwich Mean Time (GMT). This keyword prompts
you to choose a region, then a subregion to specify the time zone. Changing the
time zone converts the currently displayed time to the time in the new time zone.
Authority Admin session
Syntax set timezone
Examples The following is an example of the Set Timezone command:
SANbox #> admin start
SANbox (admin) #> set timezone
Africa America
Antarctica Asia
Atlantic Australia
Europe Indian
Pacific UTC
Press ENTER for more options or 'q' to make a selection.
America/Grenada America/Guadeloupe
America/Guatemala America/Guayaquil
America/Guyana America/Halifax
America/Havana America/Hermosillo
America/Indiana America/Indianapolis
.
.
.
America/Monterrey America/Montevideo
America/Montreal America/Montserrat
America/Nassau America/New_York
America/Nipigon America/Nome
America/Noronha America/North_Dakota
America/Panama America/Pangnirtung
Press ENTER for more options or 'q' to make a selection.
q
Enter selection (or 'q' to quit): america/north_dakota
America/North_Dakota/Center
Enter selection (or 'q' to quit): america/north_dakota/center
To Next Page
Loading...
Need help?
General
