14 – Command Reference
Set Setup Callhome
59263-01 A 14-109
A
Set Setup Callhome
Configures the Call Home database for managing e-mail notifications of fabric
problems.
Authority Admin session
Syntax set setup callhome
Prompts you in a line-by-line fashion to configure the Call Home database.
Table 14-26 describes the Call Home configuration fields.
Table 14-25. Call Home Service Configuration Settings
Entry Description
PrimarySMTPServerAddr IP address (version 4 or 6) or DNS host name of
the primary SMTP server. The default is 0.0.0.0.
PrimarySMTPServerPort Service port number that the primary SMTP
server is monitoring for SMTP agents. The default
is 25.
PrimarySMTPServerEnabled Enables (True) or disables (False) the primary
SMTP server. The default is False.
SecondarySMTPServerAddr IP address (version 4 or 6) or DNS host name of
the secondary SMTP server. The default is
0.0.0.0.
SecondarySMTPServerPort Service port number that the secondary SMTP
server is monitoring for SMTP agents. The default
is 25.
SecondarySMTPServerEnabled Enable (True) or disable (False) the secondary
SMTP server. The default is False.
ContactEmailAddress E-mail address of the person to be notified to
respond to the e-mail message. The format is
account@domain. This information is included in
the e-mail message when the profile format is
FullText.
PhoneNumber Contact phone number to be included in the
e-mail message text. This information is included
in the e-mail message when the profile format is
FullText.
StreetAddress Contact street address to be included in the e-mail
message text. This information is included in the
e-mail message when the profile format is Full-
Text.
To Next Page
Loading...
Need help?
General
