Qlogic SANbox 5802V Interface Guide

14 – Command Reference
Test Status
59263-01 A 14-197
A
Test Status
Displays the status of a test in progress, or if there is no test in progress, the
status of the last test that was executed.
Authority None
Syntax test status
port [port_number]
switch
Keywords port [port_number]
Display test status for the port given by [port_number]. [port_number] can be
0–23.
switch
Display test status for the switch: Passed, Failed, NeverRun.
Examples The following is an example of the Test Status Port command:
SANbox (admin) #> test status port 1
Port Test Test Loop Test
Num Port Type Status Count Failures
---- -------- ---- ------ ----- --------
1 1 Offline Internal Passed 12 0
The following example of the Test Status Switch command:
SANbox (admin) #> test status switch
Blade Test Test Loop Test
ID Type Status Count Failures
----- ---- ------ ----- --------
IO0 Offline internal StoppedOnError 12 2
IO1 Offline internal NeverRun 1 0
IO2 Offline internal Passed 4 0
IO3 Offline internal NeverRun 1 0
IO4 Offline internal NeverRun 1 0
IO5 Offline internal NeverRun 1 0
IO6 Offline internal NeverRun 1 0
IO7 Offline internal StoppedOnError 12 2
CPU0 Offline internal NeverRun 1 0
CPU1 Offline internal NeverRun 1 0

Qlogic SANbox 5802V Specifications

General

Brand	Qlogic
Model	SANbox 5802V
Category	Switch
Language	English