14 – Command Reference
Capture
14-10 59263-01 A
S
Capture
Manages the data capture configuration for the Tech_Support_Center Call Home
profile. The data capture configuration determines the time and frequency by
which status and trend data is collected from the switch and sent to recipients
specified in the Tech_Support_Center profile.
Authority Admin session and a Callhome Edit session. Refer to the “Callhome” command
on page 14-6 for information about starting a Callhome Edit session.
Syntax capture
add
edit
remove
Keywords add
Adds data capture instructions to the Tech_Support_Center profile. Table 14-1
describes the data capture parameters.
edit
Opens an edit session in which to modify the data capture configuration of the
Tech_Support_Center profile. Refer to Table 14-1 for a description of the data
capture configuration parameters.
remove
Removes the data capture configuration from the Test_Support_Center profile.
Table 14-1. Data Capture Configuration Parameters
Parameters Description
TimeOfDay Time of day to send status and trend data to the
Tech_Support_Center profile e-mail recipients. The format is
hh:mm on a 24-hour clock. The default 02:00.
DayOfWeek Day-of-the-week to send status and trend data to the
Tech_Support_Center profile e-mail recipients. Values can be Sun,
Mon, Tue, Wed, Thur, Fri, Sat. The default is Sat.
Interval Number of weeks between capture data e-mails to the
Tech_Support_Center profile e-mail recipients. Values can be
1–26. The default is 1.
To Next Page
Loading...
Need help?
General
