14 – Command Reference
History
59263-01 A 14-39
A
History
Displays a numbered list of the previously entered commands from which you can
re-execute selected commands.
Authority None
Syntax history
Notes Use the History command to provide context for the ! command:
îš„ Enter ![command_string] to re-execute the most recent command that
matches [command_string].
îš„ Enter ![line number] to re-execute the corresponding command from the
History display
îš„ Enter ![partial command string] to re-execute a command that matches the
command string.
îš„ Enter !! to re-execute the most recent command.
Examples The following is an example of the History command:
SANbox #> history
1 show switch
2 date
3 help set
4 history
SANbox #> !3
help set
set SET_OPTIONS
There are many attributes that can be set.
Type help with one of the following to get more information:
Usage: set { alarm | beacon | config | log | pagebreak |
port | setup | switch }
To Next Page
Loading...
Need help?
General
