14 – Command Reference
Set Alarm
14-84 59263-01 A
S
Set Alarm
Controls the display of alarms in the session output stream or clears the alarm log.
Authority Admin session for the Clear keyword. Otherwise, none.
Syntax set alarm [option]
Keywords [option]
[option] can be one of the following:
clear
Clears the alarm log history. This value requires an Admin session.
on
Enables the display of alarms in the session output stream.
off
Disables the display of alarms in the session output stream. Disabling the
display of alarms in the output stream allows command scripts to run without
interruption.
Examples The following is an example of the Set Alarm command:
SANbox #> set alarm on
To Next Page
Loading...
Need help?
General
