Page ii 59263-01 A
S
SANbox 5802V Fibre Channel Switch
Command Line Interface Guide
© 2008 QLogic Corporation. All Rights Reserved Worldwide.
First Published: November 2007
QLogic Corporation, 26650 Aliso Viejo Parkway, Aliso Viejo, CA 92656, (800) 662-4471 or (949) 389-6000
Information furnished in this manual is believed to be accurate and reliable. However, QLogic Corporation assumes no
responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its
use. QLogic Corporation reserves the right to change product specifications at any time without notice. Applications
described in this document for any of these products are for illustrative purposes only. QLogic Corporation makes no
representation nor warranty that such applications are suitable for the specified use without further testing or
modification. QLogic Corporation assumes no responsibility for any errors that may appear in this document.
This SANbox switch is covered by one or more of the following patents: 6697359; other patents pending.
QLogic and SANbox are trademarks or registered trademarks of QLogic Corporation.
Microsoft, Windows NT, and Windows 2000/2003, and Internet Explorer are registered trademarks of Microsoft
Corporation.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Document Revision History
Release, Revision A, April 2008 Firmware Version 7.4
To Next Page
Loading...
Need help?
General
