14 – Command Reference
Zoning Save
59263-01 A 14-223
A
Zoning Save
Saves changes made during the current Zoning Edit session. The system informs
you that the zone set must be activated to implement any changes.
Authority Admin session and a Zoning Edit session.
Syntax zoning save
Examples The following is an example of the Zoning Save command:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #>
.
.
SANbox (admin-zoning) #> zoning save
The changes have been saved; however, they must be activated
before they can take effect -- see zoneset activate command.
To Next Page
Loading...
Need help?
General
