14 – Command Reference
Show Setup System
59263-01 A 14-177
A
Show Setup System
Displays network, logging, NTP server, and timer parameters on the switch.
Authority None
Syntax show setup system
dns
ipv4
ipv6
logging
ntp
timers
Keywords dns
Displays DNS host name configuration parameters. To display all system
configuration parameters, omit the keyword. Refer to Table 14-31 for descriptions
of the DNS host name configuration parameters.
ipv4
Displays switch IPv4 Ethernet configuration parameters. To display all system
configuration parameters, omit the keyword. Refer to Table 14-32 for descriptions
of the IPv4 Ethernet configuration parameters.
ipv6
Displays switch IP version 6 Ethernet configuration parameters. To display all
system configuration parameters, omit the keyword. Refer to Table 14-33 for
descriptions of the IP version 6 Ethernet configuration parameters.
logging
Displays event logging configuration parameters. To display all system
configuration parameters, omit the keyword. Refer to Table 14-34 for descriptions
of the event logging configuration parameters.
ntp
Displays NTP server configuration parameters. To display all system configuration
parameters, omit the keyword. Refer to Table 14-35 for descriptions of the NTP
server configuration parameters.
timers
Displays timer configuration parameters. To display all system configuration
parameters, omit the keyword. Refer to Table 14-36 for descriptions of the timer
configuration parameters.
To Next Page
Loading...
Need help?
General
