14 – Command Reference
Profile
59263-01 A 14-61
A
Profile
Creates and modifies profiles with which to customize Call Home e-mail
notification. A profile defines the event severity level at which to generate e-mails,
e-mail subject and text, and e-mail recipients.
Authority Admin session and a Callhome Edit session. Refer to the “Callhome” command
on page 14-6 for information about starting a Callhome Edit session.
Syntax profile
copy [profile_source] [profile_destination]
create [profile]
del
ete [profile]
edit [profile]
rename [profile_old] [profile_new]
Keywords copy [profile_source] [profile_destination]
Creates a new profile named [profile_destination] and copies the configuration
into it from the profile given by [profile_source]. You must enter the Callhome
Save command afterwards to save your changes. Neither [profile_source] nor
[profile_destination] can be Tech_Support_Center.
create [profile]
Creates a profile with the name given by [profile]. A profile name must begin with a
letter and be no longer than 32 characters. Valid characters are 0-9, A-Z, a-z, _, $,
^, and -. The Tech_Support_Center profile name is reserved. You must enter the
Callhome Save command afterwards to save your changes. The Call Home
database supports a maximum of 25 profiles. Table 14-8 describes the profile
configuration parameters.
Table 14-8. Profile Configuration Parameters
Parameter Description
Level Event severity level at which to generate a Call Home e-mail
message:
None–Generates e-mail messages for all events.
Warn–Generates e-mail messages for Warning, Critical, and
Alarm events.
Critical–Generates e-mail messages for Critical and Alarm
events.
Alarm–Generates e-mail messages for Alarm events only.
To Next Page
Loading...
Need help?
General
