59263-01 A 4-1
4 Network Configuration
Network configuration consists of the IP parameters that identify the switch in the
network and provide for IP security. This section describes the following network
configuration tasks:
îš„ Displaying the Network Configuration
îš„ Configuring the Ethernet Port
îš„ Verifying a Switch in the Network
îš„ Managing IP Security
Displaying the Network Configuration
The Show Fabric command displays IP addresses for all switches in the fabric as
shown in the following example.
SANbox #> show fabric
Domain *133(0x85)
WWN 10:00:00:c0:dd:0d:53:91
SymbolicName SANbox
HostName <undefined>
EthIPv4Address 10.20.116.133
EthIPv6Address <undefined>
* indicates principal switch
To Next Page
Loading...
Need help?
General
