4 – Network Configuration
Managing IP Security
4-10 59263-01 A
S
IP Security Configuration Limits
To display a summary of the objects in the IP Security configuration and their
maximum limit, enter the Ipsec Limits command to as shown in the following
example:
SANbox #> ipsec limits
Configured (saved) IPsec Information
IPsec Attribute Maximum Current
--------------- ------- -------
MaxConfiguredSAs 512 0
MaxConfiguredSPs 128 0
In an Ipsec Edit session, Ipsec Limits command displays the number of both
configured associations and policies, plus those created in the edit session but not
yet saved.
Managing the Security Policy Database
The security policy database is made up of user-defined policies and dynamic
policies (policies created by the switch). In addition to creating a policy, you can
delete, modify, rename, and copy user-defined policies. Dynamic policies can only
be copied.
îš„ Creating a Policy
îš„ Deleting a Policy
îš„ Modifying a User-Defined Policy
îš„ Renaming a User-Defined Policy
îš„ Copying a Policy
To Next Page
Loading...
Need help?
General
