4
Accessing User Tools
User Tools allow you to change or set defaults.
Note
❒ Operations for system settings differ from normal operations. Always quit
User Tools when you have finished.
❒ Any changes you make with User Tools remain in effect even if the main
power switch or operation switch is turned off, or {Clear Modes} key is
pressed.
Reference
p.4 “Changing Default Settings”
Changing Default Settings
This section describes how to change the settings of User Tools.
Important
❒ If an Administrator Code is specified, contact your administrator.
A Press the {User Tools/Counter} key.
B Select the menu using {U} or {T}, and then press the {OK} key.
To change the System Settings, select [System Settings].
To change the Copier Features, select [Copier Features].
To change the Printer Features, select [Printer Features].
To change the Interface Settings, select [Interface Settings].
To change the language used on the display, select [Language].
To check the counter, select [Counter].
APE028S
To Next Page
Loading...
Need help?
General
