Specifications for the Main Unit
59
3
Specifications for the Main Unit
Following describes the specification of the main unit.
❖ Configuration:
Desktop
❖ Photosensitivity type:
OPC drum
❖ Original scanning:
One-dimensional solid scanning system through CCD
❖ Copy process:
Dry electrostatic transfer system
❖ Development:
Dry two-component magnetic brush development system
❖ Fusing:
Heating roll pressure system
❖ Resolution:
600 dpi
❖ Exposure glass:
Stationary original exposure type
❖ Original reference position:
Rear left corner
❖ Warm-up time:
• From the main power switch
20 seconds or less (20°C)
15 seconds or less (20°C) (For machines with the DDST Unit)
12 seconds or less (20°C) (For machines with copier function only)
• From the operation switch
10 seconds or less (20°C)
❖ Maximum original size:
A3L, 11" × 17"L
To Next Page
Loading...
Need help?
General
