11
2. System Settings
This chapter describes User Tools in the System Settings menu. For details on
how to access User Tools, see “Accessing User Tools”.
General Features
This section describes User Tools in the General Features menu under System
Settings.
Default settings are shown in bold type.
❖ Panel Key Sound
The beeper (key tone) sounds when a key is pressed.
The default setting is On.
❖ Copy Count Display
The copy counter can be set to show the number of copies made (count up),
or the number of copies yet to be made (count down).
The default setting is Up.
❖ Function Priority
You can specify the mode to be displayed immediately after the operation
switch is turned on, or when System Reset mode is turned on.
The default setting is Copier .
❖ Print Priority
Set the print priority for each mode.
The default setting is Display mode.
When [Interleave] is selected, the current print job will be interrupted after a
maximum of five sheets.
When the optional Upper Internal Tray and 500-sheet finisher are installed on
the machine, you can specify an output tray for document.
To Next Page
Need help?
General
