Placing Originals
14
1
Placing Originals in the ARDF
Place originals in the ARDF.
Settings should be made when placing custom size originals.
❖ When placing custom size originals:
See p.15 “Specifying the Original Size When a Paper Tray is Selected” and
p.18 “Specifying the Original Size When the Bypass Tray is Selected”.
1 Sensors
A Adjust the document guide to the original size.
B Set the aligned originals face up into the ARDF.
Do not stack originals beyond the limit mark.
The first page should be on the top.
Be sure not to block the sensor or load the original untidily. Doing so may
cause the machine to detect the size of the scanned image incorrectly or dis-
play a paper misfeed message. Also, be sure not to place originals or other ob-
jects on the top cover. Doing so may cause a malfunction.
1 Limit mark
2 Document guide
ZAAH280E
AZB013S
To Next Page
Loading...
Need help?
General
