Placing Originals
15
1
Note
❒ Straighten curls in the originals before placing them in the ARDF.
❒ To prevent multiple sheets from being fed at once, fan the originals before
placing them in the ARDF.
❒ Set the originals squarely.
Specifying the Original Size When a Paper Tray is Selected
You can select either regular or custom for the size of the original when a paper
tray is selected.
Regular sizes
When placing regular size originals on the exposure glass or in the ARDF, select
the size of the originals from the regular sizes shown on the display.
A Select a desired paper tray using {U} or {T}.
B Press the {q} key.
C Select [Regular Size] using {U} or {T}, and then press the {OK} key.
When [Auto Detect] is selected, the size of the placed original will be detected
automatically.
To Next Page
Loading...
Need help?
General
