Printer Features
34
4
List/Test Print
This section describes User Tools in the Test Print menu under Printer Features.
If changes are made to the machine's environment or its print-related settings,
or a new program is registered, we recommend you print the list of settings, so
they can be checked.
❖ Multiple Lists
You can print the configuration page and error log.
❖ Config. Page
You can print the machine's current configuration values.
❖ Error Log
You can print error logs listing all errors that occurred during printing.
The most recent 30 errors are stored in the error log. If a new error is added
when there are 30 errors already stored, the oldest error is deleted.
❖ Menu List
You can print a Menu List showing the Print Features.
❖ PCL Font Page
You can print the current configuration and installed PCL font list.
❖ Hex Dump
You can print in the Hex Dump mode.
❖ Operations Test
You can print an operations test page.
Note
❒ The following settings appear only if the Printer Enhance Option is installed:
• Multiple Lists, Config. Page, Error Log, Menu List, PCL Font Page, and
Hex Dump.
❒ If the Printer Enhance Option is installed, “Operations Test” does not appear.
❒ The layout of the list produced by the test print is fixed to A4 (letter size). We
recommend you load A4 or letter size paper (plain or recycled) in one of the
paper trays.
❒ The tray that contains A4 (letter) size paper is automatically selected. If A4
(letter) size paper is not loaded in any of the paper trays, Paper Tray Priority
is selected. If the paper size loaded in the Paper Tray Priority is smaller than
A4 (letter) size, the edges may be lost. If the paper size placed in the Paper
Tray Priority is larger than A4 (letter) size, margins may become too large.
To Next Page
Need help?
General
