39
4. Troubleshooting When
Using the Printer Function
This chapter describes likely causes of and possible solutions for printer function
problems. When using the DDST Unit, see “Troubleshooting When Using the
DDST Unit”.
When a Message Is Displayed during
Installation of the Printer Driver
This section describes what to do if a message appears when installing the print-
er driver.
The message number 58 or 34 indicates that the printer driver cannot be installed
using Auto Run. Install the printer driver using [Add Printer] or [Install Printer].
Windows 95/98/Me/2000
This section describes the procedure under Windows 95/98/Me/2000.
A On the [Start] menu, point to [Settings], and then click [Printers].
B Double-click the Add Printer icon.
C Follow the instructions in Add Printer Wizard.
If the printer driver is on a CD-ROM, the location of the driver is either
\DRIVERS\(RPCS, PCL6, or PCL5E)\WIN9X_ME\(language)\DISK1, or
\DRIVERS\(RPCS, PCL6, or PCL5E)\XP_VISTA\(language)\DISK1. If the
installer starts, click [Cancel] to quit.
D Specify a port.
For the setting procedure, see a description for the port you are using.
Note
❒ Available ports vary according to your Windows operating system or the
type of interface. For details, see “Preparing the Machine”, Printer Reference.
Reference
“Preparing the Machine”, Printer Reference
To Next Page
Loading...
Need help?
General
