Copying
26
2
E Select [Regular Size] using {U} or {T}, and then press the {OK} key.
F Select the paper size using the scroll keys, and then press the {OK} key.
The “
Programmed” message appears.
G Place the originals, and then press the {Start} key.
H When the copy job is finished, press the {Clear Modes} key to clear the set-
tings.
Reference
p.23 “Loading Paper on the Bypass Tray”
When Copying onto Custom Size Paper
Makes copies onto custom size paper from the bypass tray.
A Select [Byp.] using {U} or {T}.
B Load paper face down on the bypass tray.
C Press the {q} key.
D Select [Paper Size] using {U} or {T}, and then press the {OK} key.
E Select [Custom Size] using {U} or {T}, and then press the {OK} key.
To Next Page
Loading...
Need help?
General
