When the Projected Screen Cannot Be
Operated As Wanted
This section explains what to do when the projected screen cannot be operated as wanted.
Problem Solutions
The location the pen nib points at does not
correspond with what is displayed on the screen.
• Change the display settings using the
computer's graphic driver, so that the screen
projected is not scaled by the computer.
(Example: Display > General Settings >
Scaling > Maintain Display Scaling)
• Change the computer output settings so that
only the projector screen is displayed.
For details about settings, see the computer
manual.
When the Projected Screen Cannot Be Operated As Wanted
101
To Next Page
Loading...
Need help?
General
