Ricoh PJ WX4152 User Manual

2. Projecting an Image
This chapter explains the procedure for projecting an image.
Basic Operations for Using the Projector
• If [Key Lock] in [Default Settings 2] is specified as [On], you cannot operate the projector from its
control panel. Use the remote control.
• If you press a button that is disabled, the projector beeps and the "Invalid operation." or "This
function cannot be used on this product." message appears on the screen.
• If [Beep] in [Default Settings 1] is specified as [Off], the projector does not beep.
Turning On the Projector
1. Insert the connector of the power cord set into the AC In socket on the projector.
CZE015
2. Insert the power plug into a power outlet.
When [Direct Power On] in [Default Settings 2] is specified as [On], the projector turns on in this
step.
3. Press the [Power] button.
The projector beeps and the indicator flashes blue.
The start-up screen is displayed.
To project an image from the connected equipment, see page 36 "Projecting an Image".
35

Ricoh PJ WX4152 Specifications

General

Brand	Ricoh
Model	PJ WX4152
Category	Projector
Language	English