Default Settings 1 Menu
Item Default
Auto Input Search
Specify whether or not to switch to another input signal that the projector
detects when you press the [Input] button.
On
Beep
Specify whether or not to beep during use.
On
Background on No Signal
Select the image display when there is no input signal.
• Logo
• Blue
• None
Logo
Display Guidance
Specify whether or not to display the guidance for operating the
projector.
On
Start-up Screen
Specify whether or not to display the start-up screen when the projector is
turned on.
On
User Logo > Register Logo
Register a user logo. Project the image to be registered as a user logo,
and then execute this function. User logos can be displayed in the start-up
screen or as the background when there are no input signals.
You can register an image with a resolution of up to 1280 × 800 pixels.
This function is available when you select [Computer], or [HDMI] (RGB
signals) as the input signal. When you select [Network PC] or [Miracast]
as the input signal, this function is available for the computer or smart
device screen you project.
-
User Logo > Confirm Logo
Display the registered user logo.
-
User Logo > Reset Logo
Delete the registered user logo.
-
7. Changing the Projector Settings
118
To Next Page
Loading...
Need help?
General
