Temporarily Blanking the Image and Muting the Audio
Temporarily blanks the screen and mutes the audio.
This is useful when projecting images from another projector or an OHP.
1. Press the [AV Mute] button.
The image blanks and the audio mutes.
2. To cancel this function, press the [AV Mute] button again.
• An icon ( ) appears on the screen when AV mute is used.
• The AV mute function is canceled automatically if any button on the control panel is pressed.
• You can also use the [AV Mute] button on the projector's control panel.
Freezing the Image
Freezes the video or moving image that is being projected.
1. Press the [Freeze] button.
The image freezes.
2. To unfreeze the image, press the [Freeze] button again.
• An icon ( ) appears on the screen when freeze is used.
• The Freeze function is canceled automatically if any operation is performed.
• The Freeze function is for freezing the image projected on the screen. To pause the video of the
connected equipment, use the pause function of the connected equipment.
Switching the Lamp Mode
You can switch the lamp mode. To save energy, select the eco mode. To make images brighter, select
the standard mode.
Operations while Projecting Images
45
To Next Page
Loading...
Need help?
General
