USB Settings Menu
This section explains the items in USB Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the USB Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Remove USB Mem.] in [Settings]
• [USB Memory Free Space (KB)] and [USB Memory Access Status] in [Display Status]
On Web Image Monitor, you can check [Network/USB Func. Firmware Version] on the top page.
For details about Web Image Monitor, see page 166 "Managing the Projector Using Web Image
Monitor".
Settings
Still Image
Item Default
Display Effect
Select the display effect for switching the image.
• None
• Push
The current image is pushed off by the next image.
• Wipe
The current image is wiped off by the next image.
• Fade
The current image fades out and the next image fades in.
None
Display Interval (sec.)
Enter the slide show switching interval from 5 to 999 seconds.
5 seconds
Moving Image
Item Default
Repeat
Specify whether or not to repeat video playback.
Off
USB Settings Menu
123
To Next Page
Loading...
Need help?
General
