Network Settings Menu
This section explains the items in Network Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the Network Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Simple Wireless LAN Setup], [EAP Type], [Import Client Certificate], [Client Certificate User
Name], [Client Certificate List], [Import CA Certificate], [CA Certificate List], [Delete Client/CA
Certificate], [MS-CHAP v2 User Name], [MS-CHAP v2 Password], [Windows Domain Name],
[Server Certificate Authentication], [Intermediate CA Permission], [WPA/WPA2-EAP Connection
Check], and [Reset Wireless LAN Settings] in [Wireless LAN]
• [Network Setting Wizard] in [Setup Wizard]
On Web Image Monitor, you can check [Network/USB Func. Firmware Version] on the top page.
For details about Web Image Monitor, see page 166 "Managing the Projector Using Web Image
Monitor".
Wired LAN
Wired LAN Settings
Item Default
Wired LAN
Specify whether to enable or disable wired LAN.
Enable
Transmission Speed
Select a wired LAN speed that matches your network environment. It
is recommended that [Auto-Negotiation] be selected.
• Auto-Negotiation
• 10BASE-T Full Duplex
• 10BASE-T Half Duplex
• 100BASE-TX Full Duplex
• 100BASE-TX Half Duplex
Auto-Negotiation
Network Settings Menu
125
To Next Page
Loading...
Need help?
General
